| Customization: | Available |
|---|---|
| Warranty: | 1 Year |
| Fuel Type: | Diesel Burner |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Technical Parameters:
|
Model |
YG-60 |
YG-80 |
YG-100 |
YG-200 |
YG -350 |
| Hopper volume |
60L |
80L |
100L |
200L | 350L |
| Discharge method |
Asphalt pump feed |
Asphalt pump feed |
Asphalt pump feed + hand-held tube |
Asphalt pump feed + hand-held tube | Asphalt pump feed + hand-held tube |
| Heating method |
Liquefied gas + heat transfer oil |
Liquefied gas + heat transfer oil |
Italian diesel burner, heat transfer oil cycle heating |
Conduction oil indirect heating and external oil pump circulating heating |
Conduction oil indirect heating and external oil pump circulating heating |
| Temperature control |
Temperature sensor 180 ° (temperature control call) |
Temperature sensor 180 ° (temperature control call) |
Automatic temperature control system |
SLA-5000 intelligent digital temperature controller |
Automatic control by SLA-5000 intelligent digital temperature controller |
| Filling speed |
15m/min |
15m/min |
20m/min |
30-40m/min | 30-40m/min |
| Length of sealing pipe |
-- |
-- |
5m |
5m | 5m |
| Walking mode |
Push-type + brake device |
Push-type + brake device |
Push-type + trailer |
Towed | Trailer or Towed |
| Mixing method |
Manual mixing |
Manual mixing |
Electric stirring |
Electric stirring | Electric stirring |
| Power configuration |
Yamaha Gasoline Generator + Battery |
Solar panels + batteries |
Import 2KW generator |
Import Japan Brand 2.8 kw generator | Japan Brand 6.5kw |
| Dimension | 1200*700*1200mm | 1200*700*1200mm | 1350*1000*1900mm | 2400*1400*1700mm | 2000*1700*1900mm |
| Weight | 120kg | 150kg | 220kg | 860g | 960kg |
Features of Small Asphalt Crack Filling Machine:
1. Hand-push type, ride-on type, and towed type are all available to you here.
2. Equipped with Italian imported engine which improves the heat efficiency to two or three times and shortens the working time.
3. Adopt the most advanced technology, which improve the quality of pouring joint and reduce the cost.
4. The whole machine is equipped with a generator set that can provide sufficient power.
5. Advanced intelligent ignition, detection and temperature control system.
6. Unique design of oil jacket hot melt kettle.
7. Design of heat cycle heating system.
8. Efficient discharge system design, the flow rate can be adjusted.
9. Stirring system makes heating quickly and evenly.
10. The discharge pipe adopts electric heating system, which effectively eliminates the condensation problem of filling joint material in the hose an reduce the number of manual cleaning of the hose.
Nine Notes for the Operation of the Asphalt Crack Filling Machine:
1. The operator of the asphalt crack sealing machine must be trained.
2. Workers should wear reflective overalls when working on the road.
3. Before starting working, workers should check the oil circuit and pipeline connection to ensure no leakage when the crack sealing machine is working.
4. Be careful of the high temperature part of the asphalt crack sealing equipment to avoid burns.
5. When adding the cracking sealing material, pay attention to avoiding the asphalt splash.
6. There should be no water and air when adding heat conduction oil.
7. When operating the road crack sealing machine, please keep an eye on the condition of furnace and temperature thermometer.
8. If emergency happens, please turn off the power supply engine in time.
9. Don't put stones and other debris n to the oil tank of the hot asphalt crack filler machine.
Company Introbution:
Henan Yugong Machinery Co., Ltd., located in Room 2702, 27th Floor, Block B, Jingsha Plaza, Jingguang Road, Erqi District, Zhengzhou, Henan, China, gains its rapid development as a reputable machinery manufacturer. We develop from a small company with only 6 people to a company with over 100 people thanks to the trust of our customers and innovation of ourselves. We always insist that only quality can make us successful, and only innovation creates wider development direction for us.
Thanks to complete after-sale services and guaranteed quality of the machines, we have won a good reputation in our customers domestic and abroad. Up to now, we have exported our machinery to many countries around the world, such as Russia, Sri Lanka, America, South Africa, Pakistan, Guinea,Canada, Lebanon, Zambia, Ethiopia, etc.
Our Services:
1. Pre-Sale Service: Recommend Suitable Machine According to Your Application.
2. In-Sale Services: Confirm the Order, Arrange Item Production, Supervise the Packaging and Shipping, and Offer Buying Guide to Finish the Purchase.
3. After-Sale Services: 24 Hour Technical Support Online. Contact Us to Get the Prompt Reply.
FAQ:
1. Q: You are a Trading Company or Manufacturer?
A: We are an original reliable machinery manufacturer
2. Q: Do you Provide Samples? For Free or charge?
A: Yes, we can provide samples, but not for free. You have to pay for samples and freight.
3. Q: What Should We do if the Item doesn't Meet our Requirements after Receiveing?
A: If the item doesn't meet your requirements after receiving it, you can return it within 10-15 days.
4. Q: How Long is your Delivery Time?
A: It depends on the machine you buy and the quantity. Generally it is 3-5 days if the machine is in stock. And it will take 15-30 days if you want customized type.
5. Q: What is your Payment Term?
A: We accept T/T, Western Union, Money Gram, Paypal, Escrow etc. Payment<=USD 5000, 100% in advance. Payment>=USD 5000, 30% T/T in advance, balance before shipment.
){kind=link}