Asphalt Road Surface Crack Joint Sealing Machine

Product Description

Asphalt Road Surface Crack Joint Sealing Machine

Product introbution:
Asphalt crack filler machine is a kind of asphalt crack repair machine which is suitable for filling the cracks of road, expressway, asphalt and concrete pavement of municipal, airports, squares, industrial parks,as well as filling cracks of complicated and irregular pavement. As an indispensable road maintenance machine, it is mainly used for preventive maintenance of road surface diseases and in conjunction with road grooving machine and air blower. 

Technical Parameters:
 

Model	YG-60	YG-80	YG-100	YG-200	YG -350
Hopper volume	60L	80L	100L	200L	350L
Discharge method	Asphalt pump feed	Asphalt pump feed	Asphalt pump feed + hand-held tube	Asphalt pump feed + hand-held tube	Asphalt pump feed + hand-held tube
Heating method	Liquefied gas + heat transfer oil	Liquefied gas + heat transfer oil	Italian diesel burner, heat transfer oil cycle heating	Conduction oil  indirect  heating  and external oil pump circulating heating	Conduction oil indirect  heating  and external oil pump  circulating heating
Temperature control	Temperature sensor 180 ° (temperature control call)	Temperature sensor 180 ° (temperature control call)	Automatic temperature control system	SLA-5000 intelligent digital temperature controller	Automatic control by  SLA-5000 intelligent  digital temperature controller
Filling speed	15m/min	15m/min	20m/min	30-40m/min	30-40m/min
Length of sealing pipe	--	--	5m	5m	5m
Walking mode	Push-type + brake device	Push-type + brake device	Push-type + trailer	Towed	Trailer or Towed
Mixing method	Manual mixing	Manual mixing	Electric stirring	Electric stirring	Electric stirring
Power configuration	Yamaha Gasoline Generator + Battery	Solar panels + batteries	Import 2KW generator	Import Japan Brand 2.8 kw generator	Japan Brand 6.5kw
Dimension	1200*700*1200mm	1200*700*1200mm	1350*1000*1900mm	2400*1400*1700mm	2000*1700*1900mm
Weight	120kg	150kg	220kg	860g	960kg

Features of Small Asphalt Crack Filling Machine:

1. Hand-push type, ride-on type, and towed type are all available to you here.

2. Equipped with Italian imported engine which improves the heat efficiency to two or three times and shortens the working time.

3. Adopt the most advanced technology, which improve the quality of pouring joint and reduce the cost.

4. The whole machine is equipped with a generator set that can provide sufficient power.

5. Advanced intelligent ignition, detection and temperature control system.

6. Unique design of oil jacket hot melt kettle.

7. Design of heat cycle heating system.

8. Efficient discharge system design, the flow rate can be adjusted.

9. Stirring system makes heating quickly and evenly.

10. The discharge pipe adopts electric heating system, which effectively eliminates the condensation problem of filling joint material in the hose an reduce the number of manual cleaning of the hose.

 

Nine Notes for the Operation of the Asphalt Crack Filling Machine:

1. The operator of the asphalt crack sealing machine must be trained.

2. Workers should wear reflective overalls when working on the road. 

3. Before starting working, workers should check the oil circuit and pipeline connection to ensure no leakage when the crack sealing machine is working. 

4. Be careful of the high temperature part of the asphalt crack sealing equipment to avoid burns. 

5. When adding the cracking sealing material, pay attention to avoiding the asphalt splash. 

6. There should be no water and air when adding heat conduction oil. 

7. When operating the road crack sealing machine, please keep an eye on the condition of furnace and temperature thermometer. 

8. If emergency happens, please turn off the power supply engine in time. 

9. Don't put stones and other debris n to the oil tank of the hot asphalt crack filler machine. 

 

Packaging & Shipping:


 

Company Introbution:

Henan Yugong Machinery Co., Ltd., located in Room 2702, 27th Floor, Block B, Jingsha Plaza, Jingguang Road, Erqi District, Zhengzhou, Henan, China, gains its rapid development as a reputable machinery manufacturer. We develop from a small company with only 6 people to a company with over 100 people thanks to the trust of our customers and innovation of ourselves. We always insist that only quality can make us successful, and only innovation creates wider development direction for us.

 

Thanks to complete after-sale services and guaranteed quality of the machines, we have won a good reputation in our customers domestic and abroad. Up to now, we have exported our machinery to many countries around the world, such as Russia, Sri Lanka, America, South Africa, Pakistan, Guinea,Canada, Lebanon, Zambia, Ethiopia, etc.





Our Services:

1. Pre-Sale Service: Recommend Suitable Machine According to Your Application.

2. In-Sale Services: Confirm the Order, Arrange Item Production, Supervise the Packaging and Shipping, and Offer Buying Guide to Finish the Purchase.

3. After-Sale Services: 24 Hour Technical Support Online. Contact Us to Get the Prompt Reply. 

FAQ:

1. Q: You are a Trading Company or Manufacturer?

    A: We are an original reliable machinery manufacturer

2. Q: Do you Provide Samples? For Free or charge?

    A: Yes, we can provide samples, but not for free. You have to pay for samples and freight.

3. Q: What Should We do if the Item doesn't Meet our Requirements after Receiveing?

    A: If the item doesn't meet your requirements after receiving it, you can return it within 10-15 days.

4. Q: How Long is your Delivery Time?

    A: It depends on the machine you buy and the quantity. Generally it is 3-5 days if the machine is in stock. And it will take 15-30    days if you want customized type.

5. Q: What is your Payment Term?

    A: We accept T/T, Western Union, Money Gram, Paypal, Escrow etc. Payment<=USD 5000, 100% in advance.  Payment>=USD 5000, 30% T/T in advance, balance before shipment.