Traffic Line Marking Hand Push Road Marking Machine
Highway line marking machine, Hot Selling Road Line Marking Machine
YG-3400 The push-type high-pressure airless cold jet marking machine is a high-pressure flow type airless spraying machine, which uses a gasoline engine to drive a single plunger pump to form a high pressure coating in the machine. The equipment uses hydraulic transmission to drive the paint pump to work, uses the paint to compress to generate high pressure, so that the paint is atomized in the spray gun, sprayed through the nozzle.The guide rod of the machine gun frame adopts lifting design, which can adjust the spraying speed, the spraying width is accurate and convenient, the performance is stable, the quality is excellent, the marking line is thin and uniform, the corners are uniform, the labor intensity is low, the construction is quick and convenient, etc.
It is equipped with intelligent operating system, easy to operate, saves time and effort, has high work efficiency and can grow time work and other characteristics.
Product parameters
| |
YG-3400 Cold spray road marking machine |
YG-3900 Cold spray road marking machine |
| Weight |
94kg |
110kg |
| Marking width |
Change different specifications of shoes (100,150,200mm) |
Change different specifications of shoes (100,150,200,300,400,450mm) |
| Engine |
4.3Hp gasoline engine |
7Hp gasoline engine |
| Nozzle standard configuration |
517 (15cm or less) |
0.027 |
| Maximum work pressure |
25Mpa |
30mpa |
| Unloading Flow |
6L/min |
8L/min |
High pressure pipe strength
|
35mpa |
40mpa |
High pressure pipe
length
|
φ6x10m |
Ф6*2 Ф10*10m |
Working efficiency: 3 seconds and 1 meter, about 1000 meters per hour. 1kg paint can be drawn at 2-2.5 square feet.
Apply Field
- Roads
- Parking lots
- Railways
- Highways
- Bridges
- Tunnels
- Coal mines
- Buildings
- other squares and runways to draw different restrictions, guidelines and warnings on the leveling surface.
The high-pressure airless sprayer uses a high-pressure plunger pump to pressurize the paint to 3000PSK (210Kg/cm), and the high-pressure paint is delivered to the spray gun through a high-pressure hose, and the pressure is released through the nozzle to form a spray, thereby forming a dense coating on the wall surface. Because the paint does not require compressed air atomization, it is called airless spray.
Product Strength
(1)First, extremely high coating efficiency. The spraying efficiency is up to 200-500 square meters per hour, which is more than 10 times than the construction of drive rolling.
(2)Second, excellent surface quality. The sprayed layer is smooth, smooth, dense, no brush marks, roll marks, and particles.
(3)Third, extend the use of the coating. The high-pressure airless spray enables the paint particles to penetrate into the voids of the wall, so that the paint film and the wall surface form a mechanical bite, enhance the paint adhesion, and prolong the service life.
(4)Fourth, it is easy to overcome corners, voids, and uneven brushing areas.
(5)Fifth, save paint. Brush coating thickness is extremely uneven, generally in the range of 30-250um, the coating utilization rate is low, and it is easy to obtain a thickness of 30um coating for airless spraying, which can save 20-30% of the coating.
This machine uses a gasoline engine to drive the plunger pump to make the coating form a high pressure in the machine for spraying. The crossed line is evenly thick and uniform. The spray gun guide rod Lifting design, accurate and convenient spray width adjustment, low labor intensity, quick and easy construction and so on.
Main functions
.
1. Motor: It adopts true-flow sealed brushless motor, which has long life, easy maintenance and low maintenance cost.
2. The plunger pump body adopts full oil intrusive lubrication mode, which is hydraulically assisted to reduce wear. The service life can reach more than 40,000 hours.
3. Sealing pad; carefully designed and casted from imported materials from the United States. Super wear-resistant, it can be used freely in the winter and in the summer. It is resistant to fatigue and easy to replace.
4. Suction pipe network; vertical body, pipette is easy to clean and clean, one person can move independently and operate conveniently. Stainless steel processing is resistant to corrosion and the inner wall does not fall off without clogging. The liquid suction filter solves the problem that the liquid inlet surface is small and easy to block, and the liquid inlet area is increased, and the space is reduced. Built-in enlarged filter.
5. Valve body; the inlet valve and the outlet valve are super wear-resistant by ball-shaped ceramic beads. It is several dozen times longer than traditional steel balls. Keep on facing, don't break.
6. Pressure regulation; mechanical automatic pressure regulation pressure is stable, no pulse, oil intrusion protection. Long life. Easy to maintain and affordable. 7. Frame; compact and practical for vertical design. Removable, the frame can easily wind up 30 meters high pressure hose, the whole equipment is easy to hit
Road Marking machine with a width of 50mm/ 100mm/ 150mm/ 200mm/300mm/ 400mm/ 450mm can be drawn at one time.
The side line, the head and tail are neat edge line, the thickness is even, and the line type is beautiful.
Main structure
YG-6L Cold spray road marking machine,this equipment consists of frame, gasoline engine, main body of pump body, suction valve, exhaust gas valve, pressure regulator valve, high pressure hose, spray gun, suction mounting, gun mounting.
1. Pump body: It adopts full oil intrusive lubrication mode and hydraulic assist to reduce wear. The service life can reach more than 40,000 hours.
2. Seal: Well designed and cast. Super wear-resistant, it can be used freely in winter or in summer, acid and alkali resistance, fatigue resistance, easy to replace.
3. Suction pipe network: vertical body, pipette is easy to clean and clean, one person can move independently and operate conveniently. Stainless steel processing is resistant to corrosion and the inner wall does not fall off without clogging. The liquid suction filter solves the problem that the liquid inlet surface is small and easy to block, and the liquid inlet area is increased, and the space is reduced. Built-in enlarged filter.
4. Valve body: The inlet valve and the outlet valve are super wear-resistant with spherical ceramic beads, which is several dozen times longer than traditional steel balls. Keep on facing, don't break.
5. Frame: It adopts vertical design, compact and practical, easy to move, detachable, and the frame can easily wind up 30 meters high-pressure hose, and the whole equipment is easy to take care of.
Working display
Company Information
Henan Yugong Machinery Co.,Ltd. is specialized in machinery in China over 20 years.We are committed to researching and developing all kinds of mineral equipment, construction machinery, prestressed machinery, metallurgy machinery etc.
Henan Yugong Machinery Co., Ltd aims to have top quality, top reputation and top service. "Quality First, Reputation First, Be Innovative, Be Excellent" has always been our purpose. We warmly welcome your corporation from all fields and build great future for us all.
RFQ
1.Are you manufacturer or trade company?
We are manufacturer focused on machinery over 20 years.
2. What Should We do if the Item doesn't Meet our Requirements after Receiveing?
If the item doesn't meet your requirements after receiving it, you can return it within 10-15 days.
3. How Long is your Delivery Time?
It depends on the machine you buy and the quantity. Generally it is 3-5 days if the machine is in stock. And it will take 15-30 days if you want customized type.
4.What about the packing?
Standard wooden case.
5.Warranty:
One year.
6.Any other service you can provide?
logo printing; customized color; any other reasonable request from our clients.
7.Can we visit to your factory?
Yes, of course. Welcome to our factory to see our machine any time.
8.Have you exported this machine to other countries?
Yes, we have exported this machine to many countries, such as United State, South America, Africa, the Middle East and Asia and so on.
9.What is your Payment Term?
A: We accept T/T, Western Union, Money Gram, Paypal, Alibaba Escrow etc. Payment<=USD 5000, 100% in advance. Payment>=USD 5000, 30% T/T in advance, balance before shipment.
More information ,please contact :
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}