Good Quality Drilling Rig Water Well Drilling Machine Drilling Wells Machine

• Customization: Available
• After-sales Service: Aftersales Service Provided
• Warranty: 2 Years
• Model NO.: YG-600
• Condition: New
• Motor: AC Motor
• Drill Hole Diameter: >300mm
• Drill Hole Depth: >200m
• Bit Type: Diamond Bit
• Drilling Way: Rotary
• Type: Crawler
• Item: 100m-1000m Pneumatic Water Well Drill Rig Bore
• Drilling Depth: 100m to 1000m
• Drilling Diameter: 140-500mm
• Key Word 1: Drilling Rig
• Keyword 2: Water Well Drill Rig
• Keyword 3: Borehole Drilling Machine
• Type 1: Pneumatic Drill Rig
• Type 2: Mud Pump Drill Rig
• Popular Depth: 100m 200m 250m 300m 400m 500m 800m
• Type 3: Crawler, Wheels, Truck-Mounted
• Guaranty: 1-2 Years
• Delivery Time: 5-10 Working Days
• Spare Parts: 1 Set
• Drill Bit 1: Drill Hammer and Drill Bit
• Drill Bit 2: Tricone Bit
• Transport Package: Full Container
• Specification: 20′GP, 40′HQ
• Trademark: YUGONG
• Origin: China
• HS Code: 8430419000
• Production Capacity: 500 Sets/Moth

Product Description

Product Description

100m to 1000m Crawler Wheels Truck-mounted Pneumatic Water well Drill Rig bore well drilling machine

The water well drilling rig is a lightweight, efficient and multifunctional drilling equipment powered by a diesel engine. It is mainly suitable for drilling water wells, agricultural irrigation wells and other wells, especially for water extraction in mountainous areas and rock formations. project. This series of drilling rigs adopt new hydraulic technology and are equipped with high-torque hydraulic motor rotation and large-bore hydraulic cylinder propulsion.

Product name	100m to 1000m Pneumatic Water well Drill Rig bore well drilling machine
Drilling depth	100m 200m 150m 300m 400m 500m 600m 800m 1000m
Drilling hole diameter	140-500mm
Type	Crawler Wheels Truck-mounted

Drilling procedure:
1. Move the drilling rig to the location where the operation is required, and operate the telescopic cylinder handle and the outrigger cylinder handle to adjust the drilling rig parallel to the ground.
2. Operate the handle of the tilt cylinder to tilt the carriage to the stop position, tighten the two fixing bolts with a wrench, and insert the fixing pin.
3. Install the first drill pipe (2 meters), impactor, and drill bit, and fix the impactor with the impactor positioning sleeve.
4. Finely adjust the machine by operating the handle of the outrigger cylinder to ensure that the drill pipe is vertically downward.
5. Open the inlet ball valve;
6. Adjust the needle valve of the oil injector until oil droplets are seen at the bit;
7. Slowly move the rotor downward to make the impactor bit contact the ground surface, and at the same time push the impact ball valve handle to the appropriate angle to drill;
8. After the rock hole is formed, the impactor stabilizing sleeve should be replaced with a drill pipe stabilizing sleeve, and then the impact ball valve handle should be pushed to the extreme position for formal rock drilling.