Steel Profiles Roller Conveyor Shot Blasting Machine

• Application: Derusting
• Fuel: Electric
• Type: Roller Conveyor Shot Blasting Machine
• Cleanliness: High Cleanliness
• Automation: Automatic
• Certification: CE, CB, CSA, ETL, RoHS, UL, UR, SGS
• Model NO.: YGQ6980
• Feature: Shotblasting Cleaning Machine
• Condition: New
• Customized: Customized
• Product Name: Industry Shot Blasting Machine
• Material of Dust Collector: Filter Cartridge or Bag
• Features: High Efficiency, Environmental Protection
• Recovery Mode: Mechanical or Pneumatic Recycling
• Packaging: Stretched Film or Nylon
• Cleaning Width: 800~4000mm
• The Room Feed-in Size: Width 400mm, Height: 4200mm or Customized
• Power: 90kw
• Voltage: 380V, 50Hz
• Transport Package: 40-Foot High Cabinet
• Specification: 25017*4500*9015mm
• Trademark: YG/OEM
• Origin: China
• HS Code: 8424300000
• Production Capacity: 100sets/Month

Product Description

Steel Profiles Roller Conveyor Shot Blasting Machine
 

Description Roller Conveyor Shot Blasting Machine

Shot blasting machine for H beam and I beam is designed and produced by adopting the advantages of similar products from both within the country and abroad. The rusting cleaning part (shot blasting) adopts high-efficient blast wheel and full shutter type shot sand separator. The sweeping machine adopts specially made high-strength nylon rolling brush and high-pressure ventilator. The preheating and drying part of shot blasting machine may adopt various heating methods. The paint spraying part adopts high-pressure airless spraying method. The complete set of equipment is controlled by PLC, and is the large-size complete equipment of international advanced.

YGQ69 shot blasting machine is mainly used for surface treatment (namely preheating, rust removal, paint spraying and drying) of steel plate and various structural sections, as well as for cleaning and strengthening of metal structural parts.


Features Roller Conveyor Shot Blasting Machine

The series of YGQ69 steel plaste& profiles shot blasting machine pre-treament line is mainly consist of roller conveying mechanism, blasting processing, abrasice cleaning procedure, etc. It applies to surface rusting and painting art of shipping, car, motorcycel,bridge, machinery,etc.

Technical Parameters Conveyor Shot Blasting Machine
 

Technical parameter of pass-through type shot blasting machine YGQ69
No.	Model Item		YGQ698	YGQ6912	YGQ6915	YGQ6920	YGQ6925	YGQ6930	YGQ6940
1	Width of workpiece	mm	800	1200	1500	2000	2500	3000	4000
2	Size of inlet opening	mm	800*1600	1200*400	1500*400	2000*400	2500*800	3000*800	4000*400
3	Length of workpiece	mm	1200-12000	1200-6000	1200-12000	1200-12000	3000-12000	2400-12000	4500-18000
4	Roller speed	m/min	0.5-4	0.5-4	0.5-5	0.5-4	0.5-4.5	0.5-4	2-8
5	Thickness of plate	mm	3-60	3-60	1.5-60	3-60	3-60	3-110	4.5-110
6	Abrasive flow rate	kg/min	8*120	4*250	4*250	6*250	6*250	6*360	8*360
7	Abrasive initial fill	kg	4000	4000	4000	4500	4500	8000	11000
8	Adjusting height of rolling brush	mm	400	200	350	450	600	850	900
9	Ventilation capacity	m3/h	22000	17560	19000	19550	27758	28050	38000
10	Total power of shot blast machine (no dust collector)	kw	90	78.3	113.6	156.6	224.55	204.8	293.6

Conveyor Shot Blasting Machine Key Component

1.Shot Blasting Assembly
We fully take into account the operation convenience of the workers, specifically increased the sand blasting chamber operating space, set lighting system and platform, so that workers can operate convenient, effective and comprehensive. 
2.Bucket Elevator
The bucket elevator consists of speed reducer, upper and lower rolling barrel, transmission rubber belt, bucket elevator, enclosure and tightening device, etc. 
3.Roller Conveyor System
The length and width of the roller table can be customized according to customer needs.
4.Dust Removal System
This machine adopts Cartridge or bag type dust collector, is exhausted air produced during working. The dedusting efficiency is up to 99.6%, powder density is less than 100mg/m3, much stricter than the national standard. 
5. Screw Conveyor
The screws convey or consist of reducer, screw shaft, conveying Housing, rolling bearing with bases, etc. It is a kinds of standard abrasive/sand horizontal conveying device, is an important part of the abrasive recycling system of the blasting machine. 
6.Shot Separator
This machine adopts advanced Model BE full shutter type separator. The separator is mainly composed of airwash area, barrel sift, conveying screw, abrasive hopper, manual abrasive controlling valve. 
7.Electrical Control System
Set shot ball circulatory failure alarm function, if any parts of the system fails, the above components automatically stop running, to prevent the shot ball stuck and burning power device. 
8. Abrasive recycling system
This machine adopts the patented shot valve produced of our company; It can accumulate a certain time in blasting, through the manual control to provide the shot ball to the blasting device

Cleaning Effect Conveyor Shot Blasting Machine





After-sale Service: 

1. Installation and commissioning issue: We will send one technicians to assist with machine installation and commissioning, customer pays for return tickets, hotel and diet. Customer need arrange skilled worker and prepare various installation machinery and tools. 
2. Warranty time: 12 months from date of commissioning completion, but no more than 18 months from date of delivery. 
3. Supply full English documents: Including general installation drawings, pit design drawings, manual book, electric wiring diagram, electric manual book and maintenance book, etc. 
4. Exported experience: Many countries, such as The USA, Russia, UK, Ukraine, Australia, Malaysia, UAE, Egypt, Mexico, Brasil, etc. 
5. Our shot blasting spare parts are high quality with 20% High Chrome, ZGMn13, Mn65, etc. 

Company Name: Henan Yugong Machinery Co.,Ltd.
Contact Person: Eric Zhang
 
Mob: [phone]